Choose opening, dimensions and equipment
You have the opportunity to choose between windows with 1 to 4 openings. Different widths and opening types can be chosen for all openings.
The following types of opening are available:
– opens from the side (either left or right),
– opens from the side and the top (ventilation),
– opens from above.
The type of opening can be specified under Selection of Openings, directly below window dimensions.
Width: ( - mm)
Height: ( - mm)
Ülemise ava kõrgus :
Alumiste avade kõrgus :
Width of opening
( - mm)
( - mm)
( - mm)
( - mm)
( - mm)
White is the standard colour for wooden products. In addition, it is possible to select a colour tone based on the RAL-colour card and glazing tone based on the Teknos-colour card. A sauna varnish can be selected as the finish for the inside of sauna windows.
If you are unable to find a suitable tone from our colour selection, or if you need help in selecting a colour tone, please contact our customer service. We will be happy to help you.
We offer three types of decorative strips for wooden windows:
- Decorative wood strips on the surface of the glass (inside and outside)
- wood strips cutting through the glazed unit, i.e. glazing bars (different glazed units are used in the case of an intersecting glazing strip)
- PCV decorative strips on the inside of the glazed unit.
We offer 25mm wide decorative strips for the surface of the glass, installed on the surface as well as the inside of the glass, with the tone matching that of the window.
We offer glazed units with intersecting decorative strips or glazing bars for wooden windows with a width of 62mm and a width of 60mm for aluminium clad windows; in the case of an intersecting glazing bar, different types of glazing units are used, the tone of which is the same as that of the window.
Inside of glazed units we offer white PVC decorative strips with a width of 26mm. In addition, we offer a limited selection of colour PVC decorative strips in one tone and two different tones (inside one tone, outside another tone).
The selection of tones for PVC decorative strips inside of glazed units is limited, which is why we ask that all tones other than white be approved with our customer service prior to ordering.
In the case of triple glazed units, PVC decorative strips are installed in the chamber between the outer panes of glass.
As standard, double-glazed windows are installed on our products, with standard clear glass (except for our premium products, which come with triple glazed windows with CHR spacer bars) on the inside and outside. Triple glazed units provide better thermal performance than double glazed units. If you would like to raise the thermal performance of the window even further, then select CHR warm spacer bars from the selection of glazed unit spacers below, which are made from plastic and do not direct warmth from the indoors to the outside or cold from the outside indoors.
If you would like to use decorative glass on the selected product for reasons of privacy or as a design element, then you can make the selection here. The selection includes decorative glass, i.e. patterned glass and safety glass.
Decorative glass is always installed on the inside of the glazed unit, i.e. the room side. For safety glass you can select placement in the glazed unit to meet your need. For example, in the case of a sauna steam-room window, reinforced safety glass is always used on the inside of the glazed unit.
Glazed unit spacer bar:
While the use of aluminium spacer bars in a double glazed unit is standard (PVC Classic-, wooden- and aluminium clad windows), then a possible alternative is the use of CHR-chromatech warm spacer bars. Triple glazed units with CHR spacer bars are already standard in PVC Premium windows.
An CHR spacer bar has significantly lower thermal transmittance than an aluminium spacer bar, thanks to which warmth from inside does not escape to the outside, and the cold from the outside is unable to enter the inside via the spacer bar, resulting in the windows being warmer and more economical. Since the CHR spacer bar reduces heat loss from the edges of the glazed unit, then it prevents the creation of a cold bridge, which prevents condensation from forming on the windows.
An CHR spacer bar will help you raise the value of your window and reduce your heating costs.
Window flashing is installed on the outside of the window, beneath the edge, with an incline towards the outside. The purpose of the flashing is to direct water away from the window and wall of the house, and to protect the building’s constructions from water and humidity.
We offer window flashings in widths of 50-500mm (depth) and lengths based on the client’s wishes. Flashings with a length of over 2500mm are made from several pieces (continued with an overlap). The webshop offers the width of the window as the initial length for window flashings; we recommend that this measurement be checked and, if necessary, changed.
We offer window flashings in 3 different surface coatings:
– polyester dyed,
We offer L-side flashings (mouldings) for our windows and doors, which are installed along the outside edges of the window or door (left, right and top) to cover the installation space and window edges. In addition, a properly installed side flashing will block water and humidity from reaching the window’s installation spaces and subsequently entering interior spaces.
Side flashings always come in a quantity of 3 per ordered product, since a window flashing is installed along the bottom edge.
You may personally select a suitable side flashing width between 20 and 50mm for both sides, while the standard length offered by the webshop is automatically based on the dimensions of the window. If you would like side flashings of a different length, you can change this yourself.
We offer white as the standard colour for the side flashing. In addition, you can choose between 11 different tones.
We offer two types of windowsills for our windows:
PVC or plastic windowsill (with a lip) – manufactured from durable plastic, strong, easy to care for, long lifetime. Available in widths of 100-600mm, height of front part 40mm, thickness 20mm, max length 6m. Also well-suited for humid rooms.
Laminate windowsill (with and without lip) – manufactured from high-quality particle board, finished with high pressure laminate. Suitable for use in dry interior spaces. Possible to choose between two types: a windowsill with a lip and a windowsill without a lip. Available in widths of 100-650mm, thickness with lip 19/38mm and without lip 23mm, max length 4.1m (longer lengths can be made from several pieces).
If necessary, you can add a comment to your order here. After confirming the current selections, you will be directed towards the order formalisation page.